# Physics Problem Solving: A Repeatable Method That Works

Learn a step-by-step method for physics problem solving: sketch, free-body diagram, axes, equations, units and checks, with a fully worked example.

Published by BoredProf. 2026-11-11.

You read the problem twice, found an equation with the right letters in it, plugged in numbers, and got an answer that is somehow 40 meters per second for a block on a ramp. What went wrong? Usually the equation came before the picture. The fix is a fixed order of steps: sketch, choose a system, draw the free-body diagram, pick axes, state assumptions, write equations, solve with units, then check. Below is that method on a fully worked problem, a second problem to test whether it transfers, and a table of the mistakes that sink most attempts.

BoredProf publishes this article. We build an AI whiteboard tutor, so we care about the thinking behind each step, and we will mention where it fits near the end.

BoredProf

app.boredprof.com

Work Through Physics Step by Step

Explore physics ideas on a whiteboard with explanations, drawn steps, and follow-up questions grounded in your course materials.

[Start free](https://app.boredprof.com/?start=1)

## TL;DR

- Draw first, calculate last. A sketch and a labeled free-body diagram do most of the work before any equation appears.

- Solve in symbols, then substitute numbers. Symbols let you check units and test special cases like zero friction.

- Pick one system and one set of axes, and say so. Most sign errors start with an undecided positive direction.

- Finish with a check: units, size, sign and a limiting case. Universities that teach problem solving build this step in.

- Practice with a second, slightly different problem. If the method survives the change, you own it.

## Why a method beats hunting for the right equation

A common instinct is to scan the givens and grab whichever formula contains those letters. Edward Flagg of West Virginia University notes that novices often do exactly this, or copy the solution of a similar problem, and that neither approach works for every problem. He describes an expert’s approach as [five ordered steps](https://physics.wvu.edu/files/d/8a2a1bad-7b57-4577-aaa9-209aad24ea68/expertapproachtosolvingphysicsproblems.pdf): focus on the problem, describe the physics, plan a solution, execute it, and evaluate the answer. The University of Sheffield’s problem-solving page goes further and calls matching variables to an equation [a thoroughly bad idea](https://www.hep.shef.ac.uk/cartwright/phy113/lectures.html), because nothing guarantees the equation is relevant.

The frameworks differ in labels but agree on shape. OpenStax’s University Physics describes [Strategy, Solution and Significance](https://openstax.org/books/university-physics-volume-1/pages/1-7-solving-problems-in-physics). The University of Minnesota’s [Minnesota Model](https://groups.physics.umn.edu/physed/Research/CRP/psintro.html) says comprehend, represent, plan, execute, evaluate, and stresses that getting started is the hardest step. The University of Toronto’s practicals guide uses [Interpret, Develop, Evaluate, Assess](https://practicals.physics.utoronto.ca/practicals/document/117/).

The method below turns those ideas into eight concrete moves for mechanics problems:

- Sketch the situation.

- Choose a system.

- Draw a labeled free-body diagram.

- Choose axes.

- State assumptions.

- Write equations.

- Solve symbolically, then with units.

- Check signs, size and limiting cases.

Each move exists for a reason, and the worked problem shows what that reason is.

## The worked problem: a block on a rough ramp

The question. A 4.0 kg block starts from rest at the top of a ramp tilted 30° above horizontal. The coefficient of kinetic friction between block and ramp is 0.20. How fast is the block moving after it has slid 3.0 m along the ramp?

### Step 1: Sketch the situation

Draw a right triangle with the ramp rising to the right at 30°. Put a box on the slope, mark the 3.0 m path along the surface, and write the givens next to the picture: m = 4.0 kg, θ = 30°, μk = 0.20, v0 = 0, d = 3.0 m. Write the unknown too: v after 3.0 m.

Why this step follows: The Minnesota group’s advice on the first step is to decide which information matters and to [draw the problem situation](https://groups.physics.umn.edu/physed/Research/CRP/psintro.html). A sketch also exposes what the words hide, such as the fact that the motion is along the slope, not horizontal or vertical.

### Step 2: Choose a system

The system is the block alone. The ramp and Earth are outside it, so they appear as forces acting on the block.

Why: Newton’s second law is about the net force on one object. If you do not decide what the object is, you end up adding forces that act on different things, which is a quiet way to get nonsense.

### Step 3: Draw the free-body diagram

Draw the block as a dot or small box and add only the forces acting on it:

- Weight, mg, straight down, from Earth.

- Normal force, N, perpendicular to the ramp surface, pushing out from the ramp.

- Kinetic friction, f, along the surface and pointing up the slope, because the block slides down and friction opposes sliding.

Label each arrow with a name and a source. Do not draw a “force of motion” down the slope. Nothing pushes the block along; the slope component of weight is already inside the weight arrow.

Why: Every force term in your equations should trace back to an arrow on this diagram. If it is not on the diagram, it does not go in the equation. The Oregon State multiple-representations guide makes the same point: [draw a diagram and label it](https://boxsand.physics.oregonstate.edu.prod.acquia.cosine.oregonstate.edu/sites/boxsand.physics.oregonstate.edu/files/Media-2/Multiple-representations/PDF/Multiple%20Representations.pdf) every time you meet a physics problem.

### Step 4: Choose axes

Tilt your axes to match the ramp. Let +x point down the slope, the direction the block accelerates, and +y point perpendicular to the surface, away from it. OpenStax also tells you to [decide which direction is positive](https://openstax.org/books/university-physics-volume-1/pages/1-7-solving-problems-in-physics) before you start.

Now split weight into components. With the angle θ measured between the ramp and horizontal:

- Along the slope: mg sin θ (down the slope, so positive).

- Perpendicular to the slope: mg cos θ (into the surface, so negative y).

Why tilted axes: The block has no acceleration perpendicular to the ramp, and it accelerates along it. Tilted axes put the acceleration entirely on one axis, so the other axis gives a clean equation for N. With horizontal and vertical axes you would have to split N and f as well, which is more work and more places to slip.

### Step 5: State assumptions

Write them down in one line each:

- The block is treated as a point; its size and rotation do not matter.

- Friction is kinetic with a constant coefficient of 0.20.

- Air resistance is negligible.

- g = 9.8 m/s².

Why: Assumptions are the boundaries of your answer. If a later check disagrees with reality, you know which line to revisit.

### Step 6: Write the equations

Newton’s second law on each axis:

- y: N − mg cos θ = 0, because there is no acceleration perpendicular to the ramp. So N = mg cos θ.

- x: mg sin θ − f = ma, and kinetic friction is f = μk N.

Substitute N into the friction expression and the x equation:

mg sin θ − μk mg cos θ = ma

The mass appears in every term, so it cancels:

a = g (sin θ − μk cos θ)

Then, for constant acceleration from rest, v² = v0² + 2ad, so v = √(2ad).

Why symbols first: The University of Sheffield recommends [working in symbols](https://www.hep.shef.ac.uk/cartwright/phy113/lectures.html) because it lets you check dimensions and see what happens with different numbers. The University of Toronto guide adds that you should [keep quantities in symbolic form](https://practicals.physics.utoronto.ca/practicals/document/117/) while executing the plan. Here the symbols already tell you something a calculator would hide: the mass cancels, so a heavier block would slide with the same acceleration.

### Step 7: Solve with units

Acceleration:

- sin 30° = 0.500 and cos 30° = 0.866

- μk cos θ = 0.20 × 0.866 = 0.173

- a = 9.8 m/s² × (0.500 − 0.173) = 9.8 × 0.327 ≈ 3.2 m/s² down the slope

Speed after 3.0 m:

- v² = 2 × 3.2 m/s² × 3.0 m = 19.2 m²/s²

- v = √19.2 ≈ 4.4 m/s

Units check on the way: m/s² × m = m²/s², and the square root gives m/s, which is a speed.

If you want the forces as numbers too, they are mg = 39.2 N, N ≈ 34 N, friction ≈ 6.8 N, and the slope component of weight is 19.6 N. The net force down the slope is about 12.8 N, and 12.8 N ÷ 4.0 kg gives the same 3.2 m/s². Getting the same answer by a second route is a strong check.

### Step 8: Check signs, size and limiting cases

OpenStax calls this the Significance stage: check [units, reasonableness of magnitude and sign](https://openstax.org/books/university-physics-volume-1/pages/1-7-solving-problems-in-physics). Flagg suggests being skeptical and asking what a wrong answer would look like. Run these checks:

- Sign: a is positive along +x, and the block should speed up going down. Correct.

- Size: 3.2 m/s² is less than 9.8 m/s², which it must be, since the ramp is not vertical and friction opposes motion. 4.4 m/s after 3 m is a brisk walk to a jog. Plausible.

- Limit, no friction: set μk = 0 and a = g sin θ = 4.9 m/s². That is the textbook frictionless ramp, so the formula behaves. The speed would be about 5.4 m/s, higher than our 4.4 m/s, as friction should cause.

- Limit, flat ramp: set θ = 0 and the formula gives a = −μk g, a negative value. Physically, the block would not start sliding from rest, so this case only means friction would slow a moving block. It is a reminder that the formula assumes the block really slides.

- Limit, steep ramp: set θ = 90° and cos θ = 0, so a = g. Free fall. Correct.

The University of Toronto guide notes that checking special cases such as [turning off gravity or making a mass zero or infinite](https://practicals.physics.utoronto.ca/practicals/document/117/) can also give insight into the physics. Here, the limit checks show you the whole structure of the answer in three lines.

## A second problem: does the method transfer?

Understanding a method means it survives a change in the situation. Try this without looking back.

The question. The same 4.0 kg block, same ramp, same friction, is now launched up the ramp at 6.0 m/s. How far along the ramp does it travel before stopping?

Walk-through, short version:

- Sketch: same triangle, arrow of motion now up the slope.

- System: the block.

- FBD: weight, normal force, and friction. Friction now points down the slope, because the block slides up. This is the one change that matters.

- Axes: let +x point up the slope this time, since that is the direction of motion. Now both mg sin θ and friction point in the negative direction.

- Equation: −mg sin θ − μk mg cos θ = ma, so a = −g (sin θ + μk cos θ).

- Numbers: a = −9.8 × (0.500 + 0.173) ≈ −6.6 m/s².

- Distance: 0 = v0² + 2ad, so d = v0² / (2|a|) = 36 / 13.2 ≈ 2.7 m.

- Check: with no friction, d = 36 / 9.8 ≈ 3.7 m. Friction shortens the trip, so 2.7 m is the right direction. The block decelerates faster going up (6.6 m/s²) than it accelerated going down (3.2 m/s²), because friction helps gravity on the way up and fights it on the way down.

If you got a different sign pattern, the cause is almost always step 3: friction drawn in the wrong direction. That is why the diagram comes before the equations.

## Why common mistakes fail

The table lists errors we see again and again in mechanics, with the reason each one breaks the physics, not just the answer.

Mistake | 
Why it fails | 
What to do instead | 

Starting with an equation that has the right letters | 
Matching variables does not show the equation applies to this situation | 
Sketch and draw the FBD first, then pick equations from the forces and motion you see | 

Drawing a “force down the slope” as its own arrow | 
That component is already part of weight; counting it adds a force nothing exerts | 
Draw weight straight down and split it into components on your axes | 

Using N = mg on a ramp | 
The normal force balances only the perpendicular part of weight, mg cos θ | 
Write the perpendicular equation and solve for N | 

Friction pointing the same way as motion | 
Kinetic friction opposes sliding relative to the surface | 
Ask which way the surface would drag the block, then draw friction opposite | 

Switching positive direction midway | 
Signs in different equations then disagree, and the algebra still looks fine | 
State axes once and keep them for every equation | 

Plugging in numbers at the first line | 
You lose the chance to check units and see cancellations such as the mass | 
Solve for the unknown in symbols, substitute at the end | 

Dropping units while calculating | 
A wrong unit combination is the quickest signal of a wrong equation | 
Carry units on every line | 

Stopping at the number | 
An unreasonable answer goes unnoticed | 
Check sign, size and at least one limiting case | 

There is a useful way to learn from these. The Education Endowment Foundation reports that once pupils are competent in a strategy, [worked examples containing mistakes](https://educationendowmentfoundation.org.uk/news/eef-blog-mistakes-and-explanations) that they find and correct can improve long-term understanding, while showing incorrect examples too early may be counterproductive. A 2023 paper on worked examples in upper-division physics proposes [a four-step progression](https://arxiv.org/html/2307.06315v1): a fully elaborated example, a solution you explain yourself, a solution with two to four planted errors to find, and then a problem with no solution at all. Use the table above as your planted errors, but only after the method feels familiar.

## What to do when you do not know how to start

Starting is where most people stall. Three moves help.

Draw anyway. A rough sketch with the givens is never wasted. Flagg describes the expert approach as the one to use [when you do not know where to start](https://physics.wvu.edu/files/d/8a2a1bad-7b57-4577-aaa9-209aad24ea68/expertapproachtosolvingphysicsproblems.pdf), because its general steps apply to any problem.

Name the principle before the equation. Ask whether this is a forces problem, an energy problem or a momentum problem. Toronto’s guide says the plan should not be about grabbing equations but about [how each reflects the principle](https://practicals.physics.utoronto.ca/practicals/document/117/) that applies. In the ramp problem, you could also have used energy: the work done by friction is μk mg cos θ × d, which gives the same speed. Two routes to one answer is a check you will be glad of on an exam.

Write down what you would need. If you want v, which quantities would give it? Often the plan includes an intermediate quantity, here the acceleration, as Toronto’s guide describes.

## Quick check of understanding

Try these before moving on. Answers follow.

- In the first problem, if the block’s mass doubled to 8.0 kg, what happens to the acceleration?

- On the ramp, why is the normal force smaller than the block’s weight?

- If the ramp angle is increased until a = 0 for a block already sliding, what must tan θ equal?

Answers:

- It stays the same, about 3.2 m/s². Mass cancels from a = g (sin θ − μk cos θ).

- The normal force only has to balance the perpendicular component of weight, mg cos θ, and cos 30° is less than 1.

- Set sin θ = μk cos θ, so tan θ = μk. At that angle the block slides at constant speed. For μk = 0.20, that angle is about 11°.

If you could answer the third without looking, you are reasoning from the symbols rather than the numbers, which is the point of working symbolically.

## Turning the method into a routine

A few habits make the eight steps stick:

- Use a template. Rule off your page into Sketch, System and FBD, Axes and assumptions, Equations, Solve, Check. Teacher Magazine describes a similar scaffold called [GIFSCAR](https://www.teachermagazine.com/au_en/articles/using-worked-examples-in-science): Goal, Information, Formula, Substitute, Calculate, Answer, Reasonable. Any consistent scaffold beats improvising.

- Explain it out loud. The EEF highlights that [self-explanation](https://educationendowmentfoundation.org.uk/news/eef-blog-mistakes-and-explanations) and thinking aloud make the strategy explicit and can help pupils transfer it to other scenarios. Say why each arrow is there, as if teaching a friend.

- Redo a solved problem cold. Next day, cover the solution and rebuild it. Then change one thing, such as the direction of motion or the angle.

- Always evaluate. Andrew Charman at UC Berkeley observes that students often skip the diagram and [move on before assessing](https://www.ocf.berkeley.edu/~kmarwaha/charman-tips.pdf) their solution, though a little reflection can teach more than the algebra. Make the check the last line you never skip.

For a wider plan covering lectures, reading and exam prep, our guide on [how to study physics](/blog/how-to-study-physics/) covers the course-level picture. This article stays at the level of one problem.

## Using your own lecture slides with BoredProf

Your course has its own notation, its own favorite problem types, and its own sign conventions. BoredProf is an AI whiteboard tutor built around that material. You upload lecture slides, a PDF, a Word or PowerPoint file, or a photo of a homework problem. It explains the ideas out loud and draws the steps and figures on a whiteboard, with voice chat, captions and follow-up questions. You can also get feedback on your handwritten working, and lessons are saved so you can revisit them.

That maps onto the method: if a slide shows a free-body diagram you do not follow, you can ask why the friction arrow points the way it does and watch the figure drawn step by step. Use it to understand and check explanations, not as a replacement for your course or a human tutor.

The free plan includes one lecture from one course, within stated usage caps. Pro is listed at 29.99 CAD per month and Max at 59.99 CAD per month, both expanding access. Check the [BoredProf pricing and plans](https://boredprof.com) for current limits and eligibility. The [terms](https://boredprof.com/terms.html) require users to be 13 or older. You can also browse the [worked examples library](https://boredprof.com/examples) to see how a step-by-step solution looks on the board.

## FAQ

### How do I solve physics problems when I do not know which formula to use?

Do not start with the formula. Sketch the situation, list knowns and unknowns, and name the principle involved, such as Newton’s second law or energy conservation. The formula then follows from the principle and the diagram, a route that university guides from [Sheffield](https://www.hep.shef.ac.uk/cartwright/phy113/lectures.html) and [Toronto](https://practicals.physics.utoronto.ca/practicals/document/117/) both recommend.

### Should I use numbers or symbols first?

Symbols first, numbers last. Symbols let you check units, see cancellations like mass in the ramp example, and test special cases. Substituting at the end also means fewer rounding errors and one clean calculation.

### How do I know my answer is right?

Check four things: units, sign, rough size and a limiting case. If setting friction to zero gives the known frictionless result, the formula is probably built correctly. OpenStax lists [units, magnitude and sign](https://openstax.org/books/university-physics-volume-1/pages/1-7-solving-problems-in-physics) as the checks to run before you call a problem finished.

### How can I understand physics concepts instead of memorizing solutions?

Explain each step in your own words and say why it follows from the one before. Then change one detail of a solved problem and redo it. If the method still works, you are using concepts, not a memorized pattern.

## Try it on your own material

Pick one problem from your current problem set and run all eight steps on it. When you want a second voice, try the [public demo](https://boredprof.com/#demo) to see how BoredProf draws a solution, or [start free](https://app.boredprof.com/?start=1) with one lecture from your own course.

## Sources

- [OpenStax, University Physics Volume 1: Solving Problems in Physics](https://openstax.org/books/university-physics-volume-1/pages/1-7-solving-problems-in-physics)

- [West Virginia University: An Expert’s Approach to Solving Physics Problems](https://physics.wvu.edu/files/d/8a2a1bad-7b57-4577-aaa9-209aad24ea68/expertapproachtosolvingphysicsproblems.pdf)

- [University of Sheffield: PHY113/115/117/118 Problem Solving](https://www.hep.shef.ac.uk/cartwright/phy113/lectures.html)

- [University of Minnesota: The Minnesota Problem Solving Strategy](https://groups.physics.umn.edu/physed/Research/CRP/psintro.html)

- [University of Toronto: Physics Undergraduate Practicals](https://practicals.physics.utoronto.ca/practicals/document/117/)

- [Oregon State University: Problem Solving with Multiple Representations](https://boxsand.physics.oregonstate.edu.prod.acquia.cosine.oregonstate.edu/sites/boxsand.physics.oregonstate.edu/files/Media-2/Multiple-representations/PDF/Multiple%20Representations.pdf)

- [Education Endowment Foundation: Mistakes and explanations](https://educationendowmentfoundation.org.uk/news/eef-blog-mistakes-and-explanations)

- [arXiv: Why and how to implement worked examples in upper division theoretical physics](https://arxiv.org/html/2307.06315v1)

- [Teacher Magazine: Using worked examples in science](https://www.teachermagazine.com/au_en/articles/using-worked-examples-in-science)

- [UC Berkeley: Some Tips for Tackling Physics Problems](https://www.ocf.berkeley.edu/~kmarwaha/charman-tips.pdf)
