# How to Prepare for a Chemistry Exam: A Syllabus-Based Plan

A chemistry exam plan built around your syllabus and the errors that cost points: balancing, units, stoichiometry, plus a worked example and final-week schedule.

Published by BoredProf. 2026-11-20.

“I have six chapters, a stack of lecture slides and four days. Where do I even start?” Start with your syllabus, not chapter one. Sort every topic into three piles (can do cold, can do with a hint, can’t do yet), then spend most of your hours on practice problems from the second and third piles. Chemistry exams mostly reward the same few skills: balancing equations, tracking units, explaining what particles are doing, and chaining mole conversions without dropping a step. Train those, in the order your course tests them, and the exam gets much less mysterious.

Below is the plan: a way to build your topic list, the recurring errors worth fixing, one complete reaction-to-moles-to-result example, a conservation-and-units checklist, a final-week schedule and a practice question with an explained answer.

BoredProf

Make Chemistry Slides Easier to Practice

Work through your chemistry lecture slides with an AI whiteboard tutor that explains ideas aloud and draws steps and figures.

[Start free](https://app.boredprof.com/?start=1)

## TL;DR

- Build your study list from the syllabus, lecture slides, quizzes and old exams, and name specific topics instead of “study chemistry.”

- Spend most of your time solving problems, not rereading. Explain why each step follows.

- Drill the four recurring skills: balancing, dimensional analysis, particle-level explanations and mixed stoichiometry.

- Use the final week for spaced practice, one timed practice test and a light review the day before.

- Your own slides are the best source of exam-style wording, so practice from them.

## Turn your syllabus into a topic list

The University of Wisconsin–Madison Chemistry Learning Center [advises using lecture topics and pre-class activities as guides](https://clc.chem.wisc.edu/faqs/), alongside quizzes, discussion problems, practice problems and instructor-provided old exams. The same page cautions that old exams show earlier formats and styles but may not reflect this semester’s priorities or cover every concept you could be asked about. So treat old exams as a format preview, not a forecast.

UBC Science’s [2025 study-plan guide](https://science.ubc.ca/students/blog/making-final-exam-study-plan-step-step) recommends planning backward from the exam date, estimating the focused hours you really have, and naming specific topics. “Study chemistry” is a wish. “Limiting reagent problems, 40 minutes, Tuesday” is a plan.

Here is a quick way to build the list:

- Copy the syllabus or exam coverage into a table, one row per topic (for example: balancing, molar mass, stoichiometry, limiting reagents, gas laws, solutions, bonding).

- Add a column for where each topic lives: slide deck, quiz, homework set, textbook section.

- For each topic, do one problem without notes. Mark it green (correct and explainable), yellow (correct but shaky) or red (stuck).

- Schedule red first, yellow second, green last.

If you want a broader overview of structuring study time across subjects, this [overall exam preparation plan](https://faasg.com.sg/igcse-exam-preparation) shows one way to lay out weeks before an exam.

## Why practice beats rereading in chemistry

The University of Lethbridge’s chemistry study-habits guide [describes chemistry as learned by doing practice questions](https://scholar.ulethbridge.ca/sites/default/files/susanfindlay/files/study_habits_for_success_in_chemistry.pdf), not mainly by reading and memorizing, and suggests spending most out-of-class study time on them. It also recommends reviewing class notes ideally within 24 hours and listing the questions that remain.

Stanford Chemistry adds a useful habit: when you practice a problem, [explain why each step is taken](https://chemistry.stanford.edu/outreach/chemical-education/student-success/study-tips-chemistry), meaning why a piece of information matters, why a conversion is needed, and why a particular formula or reaction applies. Their page also notes that you may need to wrestle with material before it clicks. Struggling is part of the process, not a sign you are bad at this.

A test of understanding you can run today: cover your solution, then say out loud why step two comes after step one. If you can’t, you memorized a pattern rather than learning the logic.

## The four skills chemistry exams keep testing

Syllabi differ, but most general chemistry exams lean on the same four skills. Here is each one with a worked example and the reasoning behind each step.

### 1. Balancing equations

Example: balance Fe + O₂ → Fe₂O₃.

- Count atoms on each side. Left: 1 Fe, 2 O. Right: 2 Fe, 3 O. Why: atoms are not created or destroyed, so every element must match on both sides.

- Balance the element that appears in the most awkward way. Oxygen is 2 on the left and 3 on the right, so use the least common multiple, 6. That needs 3 O₂ on the left and 2 Fe₂O₃ on the right.

- Fix what that broke. Two Fe₂O₃ contain 4 Fe, so put 4 in front of Fe.

- Recount. 4 Fe and 6 O on each side.

Result: 4 Fe + 3 O₂ → 2 Fe₂O₃. The rule that keeps you safe: only change coefficients (the big numbers in front), never subscripts. Changing a subscript changes the substance.

Quick check: Balance C₂H₆ + O₂ → CO₂ + H₂O. (Answer: 2 C₂H₆ + 7 O₂ → 4 CO₂ + 6 H₂O. If you got fractions along the way, doubling everything clears them.)

### 2. Dimensional analysis

Example: a classroom problem gives 15.0 mL of ethanol with a density of 0.789 g/mL. How many grams is that?

15.0 mL × (0.789 g / 1 mL) = 11.8 g

Why it works: you arrange the conversion factor so the unwanted unit sits on the bottom and cancels. If the units don’t cancel to the one you want, the setup is wrong before you touch a calculator. That makes unit cancellation a built-in error detector.

The common slip is flipping the factor. If your answer comes out in mL²/g, you flipped it.

### 3. Particle-level explanations

Exam questions often ask you to explain what happens “at the particle level.” That means describing atoms, ions or molecules, not just writing the equation.

Example: why is boiling water different from splitting water into hydrogen and oxygen in a classroom electrolysis demonstration?

- Boiling: H₂O molecules gain energy and move apart. Each molecule stays H₂O. This is a physical change.

- Electrolysis: electrical energy breaks bonds inside H₂O molecules, and the atoms rearrange into H₂ and O₂ molecules. New substances form. This is a chemical change.

A good particle-level answer names the particles, says what happens to the bonds or the spacing, and ends by stating whether new substances form. When you draw it, count the atoms of each element in the before and after pictures. They must match.

Quick check: In a drawing of 2 H₂ + O₂ → 2 H₂O, how many hydrogen atoms appear before and after? (Four each. If your drawing shows five after, your picture breaks conservation.)

### 4. Mixed stoichiometry

This is where several skills chain together: grams to moles, moles to moles, moles to grams, sometimes with a limiting reagent. The next section walks through a full example.

The UNC Learning Center suggests [changing familiar problems into new scenarios](https://learningcenter.unc.edu/tips-and-tools/chemistry-learning-strategies/), such as reversing what is given and what is asked, so unfamiliar exam questions feel less strange. After you solve the example below, try asking for the grams of propane needed to make a target mass of CO₂ instead.

## One full example: reaction to moles to result

Question: Propane burns in oxygen. How many grams of CO₂ form from 22.0 g of propane (C₃H₈)? Assume oxygen is in excess.

Step 1: Write and balance the reaction.
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
Check: 3 C, 8 H, 10 O on each side. Why first: the coefficients are the only source of the mole ratio you need later.

Step 2: Convert the given mass to moles.
Molar mass of C₃H₈ = 3(12.011) + 8(1.008) = 44.097 g/mol.
22.0 g × (1 mol / 44.097 g) = 0.499 mol C₃H₈
Why: reactions happen particle for particle, and moles count particles. Grams can’t be compared directly across substances.

Step 3: Use the mole ratio.
0.499 mol C₃H₈ × (3 mol CO₂ / 1 mol C₃H₈) = 1.50 mol CO₂
Why: the balanced equation says every 1 propane makes 3 CO₂.

Step 4: Convert moles of the answer to grams.
Molar mass of CO₂ = 12.011 + 2(15.999) = 44.009 g/mol.
1.50 mol × 44.009 g/mol = 65.9 g CO₂
Why: the question asked for grams.

Step 5: Sanity-check. Carbon atoms are conserved: each propane has 3 carbons and each CO₂ has 1, so you expect about three times as many moles of CO₂ as propane. Since the molar masses are nearly equal (44.1 and 44.0 g/mol), the CO₂ mass should be about three times the propane mass, roughly 66 g. It is.

The whole chain in one line: grams → moles → moles → grams. Write that skeleton above any stoichiometry problem and you will rarely lose your place. For more on this routine, see [our 6-step method for solving chemistry problems](/blog/solve-chemistry-problems).

## The conservation-and-units checklist

Run this on every calculation before you move on. It takes about thirty seconds and catches most lost points.

Conservation

- Does every element have the same atom count on both sides?

- Did I change only coefficients, never subscripts?

- If it’s an ionic equation, is the total charge equal on both sides?

- Does my particle drawing show the same number of each atom before and after?

Units

- Do the units cancel to the one the question asks for?

- Did I convert to moles before using a mole ratio?

- Did I use the molar mass of the right substance (the one I’m converting, not the other)?

- Are my significant figures consistent with the least precise given value?

- Is the answer’s size plausible? A mass of product larger than the total mass of reactants is a red flag.

## Use your mistakes, not just your successes

The Royal Society of Chemistry’s education team reported in 2025 on [a five-stage problem-solving approach](https://edu.rsc.org/education-research/how-metacognition-improves-student-engagement-and-outcomes/4020885.article): understand, analyse, plan, implement and evaluate. Their account says that repeated use of the scaffold, together with expert solutions, self-assessment and reflection, strengthened students’ problem-solving and metacognition (thinking about your own thinking).

You can borrow the idea with a simple error log. For every missed problem, write one line: what I did, what the correct move was, which category it belongs to (balancing, units, particle-level, mole ratio, arithmetic). After a week you will see that your errors cluster, and clusters are cheap to fix.

## Practice like the exam

Waterloo’s chemistry guide [recommends writing one or two past term tests under controlled conditions](https://uwaterloo.ca/centre-advanced-science-education/news/some-dos-and-donts-chemistry-tests-prepare-write-and-reflect) to check format and timing, while not letting old tests replace assigned problems and lecture notes. It also suggests trying harder assigned problems under test conditions with only the aids you’re allowed. Carleton’s Science Student Success Centre similarly suggests [redoing past finals, midterms and tutorials](https://vm05.physics.carleton.ca/resources-subject-resources/chemistry-resources) without looking at notes or formula sheets.

In practice: do one timed set per week early on, then one full timed practice test in the final week. Grade it with your error log, not just a score.

## A final-week schedule

The University of Pittsburgh’s [seven-day plan](https://www.asundergrad.pitt.edu/study-lab/study-skills-tools-resources/seven-day-test-prep-plan) suggests starting roughly 7 to 10 days out, spacing study sessions, and starting with difficult material so you have time to get help. UNC’s Learning Center [recommends spreading study across days](https://learningcenter.unc.edu/tips-and-tools/strategic-test-prep/) and specifying what, where and for how long each session will run. Here is a template you can adapt to your syllabus.

Day | 
Focus | 
Output | 

7 days out | 
Build the topic list; mark green, yellow, red | 
Ranked list of topics | 

6 | 
Hardest red topic #1 (often limiting reagents or equilibrium) | 
5 problems with step explanations | 

5 | 
Red topic #2, plus balancing and dimensional analysis warm-up | 
Error log started | 

4 | 
Particle-level explanations: draw and describe for each unit | 
1 page of annotated drawings | 

3 | 
Mixed stoichiometry set, then yellow topics | 
8 chained problems | 

2 | 
Timed practice test under exam conditions | 
Scored, errors categorized | 

1 | 
Fix the top three error types; skim formula and constants sheet; stop early | 
Short review, then sleep | 

Pitt’s plan also suggests using the last day for brief review and a good night’s sleep rather than as the main study day. Waterloo advises [not learning new concepts on exam day](https://uwaterloo.ca/centre-advanced-science-education/news/some-dos-and-donts-chemistry-tests-prepare-write-and-reflect), reviewing core ideas instead, having your materials ready, and resting, eating and drinking enough. During the test, it says to read every word, note key instructions, budget time by marks, and write neatly with precise diagrams.

If you only have two days, keep the same logic: topic list, red topics first, one timed set, error log, early night.

## Practice question with an explained answer

Question: In a classroom synthesis, 10.0 g of N₂ reacts with 3.00 g of H₂ according to N₂ + 3 H₂ → 2 NH₃. Which reactant is limiting, and what mass of NH₃ can form?

Try it before reading on.

Answer:

- The equation is already balanced (2 N, 6 H on each side).

- Moles of N₂: 10.0 g ÷ 28.02 g/mol = 0.357 mol.

- Moles of H₂: 3.00 g ÷ 2.016 g/mol = 1.49 mol.

- Compare to the ratio. 0.357 mol N₂ would need 3 × 0.357 = 1.07 mol H₂. You have 1.49 mol, so H₂ is in excess and N₂ is limiting.

- Moles of NH₃: 0.357 mol N₂ × (2 mol NH₃ / 1 mol N₂) = 0.714 mol.

- Mass of NH₃: 0.714 mol × 17.03 g/mol = 12.2 g.

Why the limiting reagent decides: the reaction stops when one reactant runs out, so the amount of product is set by whichever reactant would run out first, not by the one you have the most grams of. Notice that H₂ has the smaller mass but is the one in excess, because its molar mass is tiny. That is exactly why comparing grams directly misleads.

## Where college chemistry help fits

You don’t have to do this alone, and your school likely has more help than you realize. Stanford Chemistry recommends [combining lectures, sections, office hours, study groups, independent study and tutoring](https://chemistry.stanford.edu/outreach/chemical-education/student-success/study-tips-chemistry) rather than treating them as alternatives. Washington University in St. Louis describes [Peer-Led Team Learning groups](https://ctl.wustl.edu/learningcenter/resources/general-chemistry-resources/) of 6 to 8 students that meet weekly. UC Berkeley’s Student Learning Center lists [science drop-in tutoring](https://slc.berkeley.edu/programs/science/drop-tutoring) for chemistry homework, lecture and text questions and practice exams. If you’ve already struggled on an early exam, UW–Madison suggests [talking with your TA and instructor](https://clc.chem.wisc.edu/faqs/) and considering its Chemistry Learning Center where your course is supported.

For choosing among tutoring options, our guide to [picking an online chemistry tutor](/blog/online-chemistry-tutor) covers what to look for. To see how the method looks across other subjects, there are matching plans for [physics](/blog/prepare-for-physics-exam) and [biology](/blog/prepare-for-biology-exam) exams.

## Practicing from your own slides with BoredProf

Your professor’s slides decide what shows up on the exam: the notation, the sample problems, the way a concept is phrased. BoredProf is an AI whiteboard tutor built around that material. You upload lecture slides, PDFs, Word or PowerPoint files, or a photo of homework, and it explains ideas out loud while drawing steps and figures on a whiteboard. You can ask follow-up questions by voice, turn on captions, save lessons to revisit, and get feedback on your handwritten working. That last part pairs well with the error log above: you work a stoichiometry chain on paper, then check each step against the explanation.

The free plan covers one lecture from one course, within stated usage caps. Pro is 29.99 CAD per month and Max is 59.99 CAD per month, and both expand access. Check the [live pricing page](https://boredprof.com) for current limits, prices and eligibility. Terms require you to be 13 or older ([see the terms](https://boredprof.com/terms.html)). BoredProf supports course-specific understanding and does not replace your class, your instructor or a human tutor, and it can’t promise any particular grade.

Want to see how the whiteboard works before uploading anything? The [public demo](https://boredprof.com/#demo) uses prewritten sample answers drawn on the real board. When you’re ready to try your own slides, [start the free plan](https://app.boredprof.com/?start=1), no card needed. You can also browse [worked examples](https://boredprof.com/examples) to see the step-by-step style.

## FAQ

### How do I study for a chemistry exam if I only have two days?

Build a topic list from your syllabus and slides, mark each topic green, yellow or red, and spend most of your time on red topics with timed practice problems. Do one timed set on day two and fix your top error types. Skip learning new material on the last day and get a full night’s sleep.

### Should I memorize formulas or practice problems?

Practice problems. A University of Lethbridge guide describes chemistry as learned by doing practice questions rather than mainly by reading and memorizing. Learn the few relationships your course provides, then use them repeatedly in problems, saying why each step follows.

### How do I get better at stoichiometry?

Write the skeleton grams → moles → moles → grams above every problem, balance the equation first, and check that units cancel. Then reverse the question, asking for the starting mass given the product mass, to build flexibility. Log every error by type so you can see whether the trouble is balancing, molar mass or the mole ratio.

### Are old exams enough to prepare?

They are a useful preview of format and timing, but not a complete guide. UW–Madison cautions that old exams may not reflect the current semester’s priorities, and Waterloo says they shouldn’t replace assigned problems and lecture notes. Use them for one or two timed runs, and keep working from your own slides and homework.

### Can high school students use this plan?

Yes. The skills (balancing, unit cancellation, mole conversions) are the same in a first chemistry course. Match the problem difficulty to your class, and if you want to use BoredProf, note that its terms require age 13 or older.

## Sources

- [FAQs, Chemistry Learning Center, UW–Madison](https://clc.chem.wisc.edu/faqs/)

- [Study Tips for Chemistry, Stanford Chemistry](https://chemistry.stanford.edu/outreach/chemical-education/student-success/study-tips-chemistry)

- [Study habits for success in chemistry, University of Lethbridge](https://scholar.ulethbridge.ca/sites/default/files/susanfindlay/files/study_habits_for_success_in_chemistry.pdf)

- [Some do’s and don’ts of chemistry tests, University of Waterloo](https://uwaterloo.ca/centre-advanced-science-education/news/some-dos-and-donts-chemistry-tests-prepare-write-and-reflect)

- [Chemistry Resources, Carleton Science Student Success Centre](https://vm05.physics.carleton.ca/resources-subject-resources/chemistry-resources)

- [Making a Final Exam Study Plan, UBC Science](https://science.ubc.ca/students/blog/making-final-exam-study-plan-step-step)

- [Strategic Test Prep, UNC Learning Center](https://learningcenter.unc.edu/tips-and-tools/strategic-test-prep/)

- [Chemistry Learning Strategies, UNC Learning Center](https://learningcenter.unc.edu/tips-and-tools/chemistry-learning-strategies/)

- [The Seven-Day Test Prep Plan, University of Pittsburgh](https://www.asundergrad.pitt.edu/study-lab/study-skills-tools-resources/seven-day-test-prep-plan)

- [How metacognition improves student engagement and outcomes, Royal Society of Chemistry](https://edu.rsc.org/education-research/how-metacognition-improves-student-engagement-and-outcomes/4020885.article)

- [General Chemistry Resources, Washington University in St. Louis](https://ctl.wustl.edu/learningcenter/resources/general-chemistry-resources/)

- [Drop-In Tutoring, UC Berkeley Student Learning Center](https://slc.berkeley.edu/programs/science/drop-tutoring)
