← All study guides
Physicsstudy guide

How to Prepare for a Physics Exam: A 7-Day Plan

A seven-day physics exam plan built from your syllabus and slides: closed-book recall, mixed problems, diagrams, a timed mock, a formula sheet and an error log.

NmgFf start with the principle. ΣF = ma
On this page
  1. 01TL;DR
  2. 02Why rereading fails and closed-book practice works
  3. 03Before day 1: gather your three raw materials
  4. 04The seven-day plan
  5. 05Build a formula sheet that records assumptions and units
  6. 06Sample free-body diagram task, with a self-check
  7. 07The error-review loop
  8. 08Quick check of understanding
  9. 09When you have less than seven days
  10. 10Using your own slides in BoredProf
  11. 11FAQ

“I’ve read the chapter three times and I still blank on the first problem. What am I doing wrong?” Almost certainly this: you are rereading, and the exam asks you to recall and apply. The fix is to spend your week solving problems closed-book, drawing the setup before any algebra, and logging every mistake until it stops repeating. Below is a seven-day plan that does exactly that, built from your own syllabus, lecture slides and past problem types. No plan can guarantee a grade, but this one aims your hours at what you can’t yet do.

BoredProf can explain your own slides out loud and draw the steps on a whiteboard, which helps on the days when a concept refuses to click. The plan works with or without it.

BoredProf
app.boredprof.com
Make Physics Concepts Click
Upload your lecture slides or problem photo, then hear explanations and follow the steps drawn on a whiteboard.
Start free

TL;DR

  • Day 1: turn your syllabus into a topic map and rate each topic by trying questions without notes.
  • Days 2 to 4: rebuild weak topics, then move to mixed problems and diagram practice, always closed-book first.
  • Day 5: sit a timed mock under exam conditions. Day 6: fix what it exposed. Day 7: light review and rest.
  • Build a formula sheet that records assumptions and units, not bare equations.
  • Keep an error log. Each mistake gets a cause, a fix and a re-solve.

Why rereading fails and closed-book practice works

Rereading feels productive because the material looks familiar. Familiar is not the same as retrievable. Edutopia’s piece on test prep explains that rereading creates a false impression of understanding, while self-corrected practice tests show what you actually know.

Physics departments say the same thing. The University of Washington’s physics department recommends practicing problems alone with only the notes or equation sheet you will have during exams. The University of Texas handout asks for recall-and-use knowledge rather than mere recognition of a principle.

A 2023 study in an introductory physics course found that high-achieving students used more active strategies, such as problem solving and group discussion, while lower-performing students leaned on passive rereading. Handing students a list of methods was not enough on its own. So the plan below tells you what to do each day, not just what to try.

Why rereading fails and closed-book practice works

Before day 1: gather your three raw materials

You need three things on the desk:

  1. Your syllabus or exam outline. It lists what is examinable. UNC’s Learning Center suggests finding each unit’s learning goals, often in the syllabus, slides or TA review sheets.
  2. Your lecture slides. They show what your professor emphasizes and how they set up problems.
  3. Past problem types. Homework, quizzes, old exams, or any problem sets you were assigned. The University of Texas handout says to check past exams but not to assume only those problem types will recur.

If you are in high school, use your teacher’s review sheet and unit tests in place of a university syllabus. Everything else works the same.

The seven-day plan

Plan for about two to three focused hours a day. If you have less, keep the order and shrink each block. Every day starts with ten minutes of closed-book retrieval: write down, from memory, the key ideas and equations from yesterday, then check them.

Day 1: Map the syllabus and find your red topics

List every examinable topic. Under each, write three headings: concepts, equations, question types. For a mechanics exam, “Newton’s second law” might carry the concept (net force produces acceleration), the equation (ΣF = ma) and the question types (inclines, pulleys, elevators).

Then diagnose. UNC recommends grouping problems by learning goal and solving one from each group under time pressure so you quickly see which topics need review. Do that: one or two problems per topic, no notes. Rate each topic:

  • Green: solved cleanly.
  • Amber: right idea, slow or sloppy.
  • Red: stuck, or wrong in a way you can’t explain.

The Weingarten Center at Penn suggests starting with an equal number of questions per topic, then shifting toward weak ones. Day 1 is the equal-numbers part. Your red list drives days 2 to 4.

Day 2: Rebuild red topics from concepts, not formulas

Take your reddest topic. Reread the slide section once, then close it and explain the idea in your own words, as if to a classmate. Middlebury’s physics guide advises treating your notes as if you must explain the subject to someone else.

If the explanation stalls, that is the gap. This is where a spoken, drawn walkthrough helps: upload the relevant slides to BoredProf and it explains them out loud while drawing steps and figures on a whiteboard, and you can ask follow-up questions as you go. Then close it and re-explain.

Finish with two worked examples from your notes. Cover the solution, solve, compare.

Day 3: Mixed problems, closed-book first

Exams do not label the topic for you. Mix problems from different units so you have to decide which principle applies. The CMU open course on physics study skills lists interleaved practice, self-explanation and practice quizzing among research-informed strategies for introductory physics.

UNC also advises giving yourself 10 to 15 minutes to struggle with a problem before consulting any resource, and writing down which ideas you think apply. Only then look at the solution, and note why you missed what you missed.

Day 4: Diagram practice

Many physics errors begin before the algebra. A wrong diagram gives you wrong equations that look perfectly reasonable. Today, for 10 to 15 problems, draw only the setup: free-body diagrams, coordinate axes, field lines, ray paths or system boundaries, depending on your course. The 7-day plan from Physics College makes the same point. The sample task below shows what a good diagram session looks like.

Day 5: Timed mock exam

Build a mock from past problems and homework, matching the real exam’s length and format. Use only the formula sheet you’ll be allowed. Do the timing math in advance: 20 questions in an hour is 3 minutes per question, so if you run slow, speeding up has to be practiced, not hoped for.

For each problem, mark whether you finished within your time budget. Don’t look anything up until the time is up.

Day 6: The error-review loop

This is the day that moves your score most, so don’t skip it for more new problems. Run the loop below on every mistake from the mock. Then re-solve the missed problems from a blank page, without the solution.

Day 7: Light review and logistics

One day out, take five to ten old problems and write only the first steps: diagram, knowns, unknowns, principle. Physics College recommends this kind of first-three-steps drill and an early stop to rest. Reread your formula sheet once. Check the exam room, time, calculator and what you’re allowed to bring. Then stop.

Build a formula sheet that records assumptions and units

A list of equations is how people end up using constant-acceleration formulas on a problem where acceleration changes. A better sheet records four things per entry: the equation, the conditions under which it holds, what each symbol means with its unit, and a sanity check.

Entry Equation Assumptions Symbols and units Sanity check
Newton’s second law ΣF = ma Inertial frame; mass constant F in N (kg·m/s²), m in kg, a in m/s² Net force and acceleration point the same way
Kinetic friction f = μₖN Surface is sliding; N is the normal force, not always mg f and N in N, μₖ unitless Friction opposes the sliding direction
Constant acceleration v = v₀ + at Acceleration constant along the motion v in m/s, a in m/s², t in s Units on both sides reduce to m/s

Units do real work here. The open textbook Problems in Introductory Physics trains you to check that the units make sense on both sides of an equation and use them to locate the line of algebra where a mistake happened. The University of the West Indies olympiad sheet adds that you should express quantities of the same type in the same units before relating them.

Write the sheet by hand from memory on day 2, then compare it against your slides. What you forgot to write is what you need to learn. If your exam gives you an equation sheet, build yours anyway: it shows you which conditions the given equations quietly depend on.

Sample free-body diagram task, with a self-check

The task. A 5.0 kg block slides down a 30° incline. The coefficient of kinetic friction is 0.20. Find its acceleration. Use g = 9.8 m/s².

Step 1: Draw the block and three forces. Weight points straight down. The normal force points perpendicular to the surface, away from it. Kinetic friction points up the slope, because the block slides down and friction opposes sliding.

Step 2: Choose axes along and perpendicular to the incline. Why: the acceleration is along the slope, and the normal force already lies on the perpendicular axis, so only the weight needs splitting into components.

Step 3: Split the weight. W = mg = 5.0 × 9.8 = 49 N. Along the slope: 49 × sin 30° = 24.5 N. Perpendicular to the slope: 49 × cos 30° ≈ 42.4 N.

Step 4: Find the normal force. There is no acceleration perpendicular to the slope, so N = 42.4 N. Why this matters: friction depends on N, and N is not simply mg on an incline.

Step 5: Find friction. f = μₖN = 0.20 × 42.4 ≈ 8.5 N.

Step 6: Apply ΣF = ma along the slope. Down-slope is positive: 24.5 − 8.5 = 16.0 N = 5.0 × a, so a ≈ 3.2 m/s², directed down the slope.

Self-check, three questions:

  1. Units: N divided by kg gives m/s². Yes.
  2. Limits: with no friction, a = g sin 30° = 4.9 m/s². Ours is smaller, as it should be with friction on.
  3. Mass: try the algebra symbolically: a = g(sin θ − μ cos θ). The mass cancels, so a 10 kg block should slide at the same rate. If your answer depended on mass, look for the error.

Now make it your own: change the angle to 20° and decide, before calculating, whether acceleration goes up or down. (Down: less of the weight pulls along the slope.) For the full method behind this kind of problem, see a repeatable approach to physics problem solving.

The error-review loop

A mistake you only notice is a mistake you will repeat. Utah State’s academic support guidance says test errors usually indicate knowledge gaps or errors in test-taking strategy, and suggests checking whether you misread the question or mismanaged time. Physics College suggests recording where the process broke down: concept, equation choice, setup, algebra, units or interpretation.

Keep a simple log with one row per missed problem:

Problem Where it broke Why Fix Re-solved?
Incline with friction Setup Used N = mg Resolve weight first, then N Yes, day 6
Circular motion Equation choice Used linear kinematics Ask: is the speed constant or changing direction? Yes, day 6
Energy with spring Units Centimeters in a joule equation Convert before substituting Yes, day 7

Then close the loop. Stanford’s Physics 41 tips say to write down your questions about missed problems, get them answered, then answer them yourself without notes. If the same cause shows up three times, that is your real weak spot, and it may not be a physics topic at all. For more on turning errors into progress, see this guide to learning from mistakes.

The research also supports using practice exams to judge readiness. A 2023 study in Physical Review Physics Education Research found that practice exams help students recognize knowledge gaps. Penn’s Weingarten Center suggests tracking your confidence against your results to see whether you over- or underestimate yourself.

Quick check of understanding

Cover the page and answer in your head:

  1. Why do we resolve the weight into components on an incline instead of using mg directly?
  2. On day 4, why draw the diagram before writing any equation?
  3. A problem on your mock goes wrong because you used degrees in a calculator set to radians. Which column of the error log does it go in?

Answers: (1) The motion and the normal force lie along and perpendicular to the slope, so only the weight is at an angle. (2) A wrong setup produces confident but wrong equations. (3) Units or setup, with the fix being to check calculator mode before every exam.

When you have less than seven days

Compress, don’t skip. With three days, keep the order: day one for the topic map and diagnostic plus red-topic rebuilding, day two for mixed problems, diagrams and a short timed set, day three for error review, the first-three-steps drill and rest. Physics College’s plan for three days out centers on timed mixed sets, solving without notes first and recording where the process broke. The wikiHow guide adds a useful triage rule: if you have no trouble with a problem type, you don’t need to spend much time on it. With little time, spend it on red topics and let green ones get only a short recall check.

The broader habits behind this plan are covered in our guide to studying physics.

Using your own slides in BoredProf

The weak point in most exam prep is the moment a concept stops making sense and you have nobody to ask. BoredProf is an AI whiteboard tutor for students studying their own course materials. You upload lecture slides, PDFs, Word or PowerPoint files, or a photo of homework. It explains the ideas out loud, draws the steps and figures on a whiteboard, and lets you use voice chat, captions and follow-up questions. Lessons are saved so you can revisit them, and it can give feedback on handwritten working.

The free plan covers one lecture from one course, with stated usage caps, and Pro and Max expand access; the pricing and terms list current limits and prices. Users must be 13 or older under the terms. BoredProf fits course-specific understanding: it does not replace your curriculum or a human tutor, and it does not promise grades. A good use on day 2 or day 6: take the slide behind a missed problem, have it walked through aloud, then close it and re-solve from scratch. You can also browse worked examples to see how it draws a solution, or try the public demo at boredprof.com/#demo.

FAQ

How many hours a day should I study for a physics exam?

There is no research-backed magic number, so build from what you can sustain. Two to three focused hours with closed-book practice usually beats longer sessions of rereading. Physics Plus suggests a 60-minute session of 15 minutes on notes and equations, 25 on exam questions, 10 marking and 10 logging mistakes.

Should I memorize formulas or understand them?

Both, in that order. Duke’s physics handout argues that building the big-picture structure first lets individual facts attach to something, while isolated memorized facts slip away. Learn what each equation says and when it applies, then practice recalling it.

Is it better to do past exams or homework problems?

Use both. Past exams show the format and timing, and homework shows the range of problem types your professor assigns. Don’t assume only past exam types will return; the University of Texas handout says to generate your own list of expected themes and problem types.

How do I know I’m ready?

When you can solve mixed problems closed-book, within time, and your error log shows no repeated cause. Edutopia notes that as correct answers on practice tests increase, you can see your progress. If your timed mock still has red topics, spend remaining hours there.

Can I use this plan for AP or high school physics?

Yes. Swap the university syllabus for your teacher’s unit list and review sheets, and use your class tests as past problem types. If you use BoredProf, you must be 13 or older.

Ready to try it on your own material? Start with the public demo or start the limited free plan.

Sources

The next step is yours.
Try explaining it without looking at the notes.

← All study guides

a little help between classes

one clearer step.

Occasional study tips, worked examples, and BoredProf updates.

Get study tips →

Free emails. Unsubscribe whenever you like.

Start free

One lecture from one course, on us. No card. When you want your whole course, Pro is there.

Start free →