You have a solution in front of you. Every line is right, and you still can’t say why line three follows from line two. What should a step-by-step explanation give you that a bare answer doesn’t? It should give you the goal, one justified move at a time, the assumptions behind each move, and a way to check the result. If a solution does that, you can reuse it. If it doesn’t, you have only copied it.
This guide shows what a useful explanation looks like, walks through a complete algebra example, transfers the same habits to physics, and gives you prompts for stuck moments and a self-check to do without peeking. BoredProf publishes this article, and we mention how our whiteboard tutor fits in where it is relevant.
TL;DR
- A useful step-by-step explanation states the goal, makes one justified move per step, names its assumptions, and ends by checking the answer.
- Research on worked examples suggests that studying solved problems helps beginners, especially when they explain each step to themselves.
- Reading a solution is not the same as understanding it. Cover the next step, predict it, then compare.
- When a step is unclear, ask a specific question: why is this move allowed, and what would break if I skipped it?
- Finish with a problem you solve alone, then substitute your answer back into the original problem.
What a step-by-step explanation actually is
A worked example, the formal name for a step-by-step solution, has three parts according to the MIT Teaching + Learning Lab: the problem as stated, the procedure step by step, and the solution. That is the skeleton. The part that makes it teach is the reasoning attached to each step.
The U.S. Department of Education’s What Works Clearinghouse practice guide describes explicit math instruction as clear explanations plus step-by-step modeling, with the reasoning behind each step discussed as it is demonstrated. So there are three things you may be handed:
| What you get | What it shows | What it leaves out |
|---|---|---|
| Final answer | The result | Everything you would need to repeat it |
| List of instructions | What to do, in order | Why each move is allowed |
| Step-by-step explanation | What to do, why it works, and how to check | Nothing you need, if done well |
A list of instructions can be followed without understanding. The research literature on procedures from Oxford Physics makes a related point from the physicist’s side: use words to set up the problem and to say why you picked a particular equation, for example naming conservation of energy before writing the energy equation.
Four things every good explanation does
This is the checklist we use. It works on a textbook solution, a classmate’s notes, or a tutor’s whiteboard.
- States the goal. What are we solving for, and in what form? Oregon State’s physics communication handout asks writers to add goal reminders along with assumptions and brief comments on significant steps (Oregon State physics).
- Makes one justified transformation at a time. Each line should differ from the previous line by one move you can name: distribute, add the same number to both sides, divide both sides by the same nonzero number.
- Names its assumptions. Ignoring air resistance, assuming the reaction goes to completion, assuming a denominator is not zero. Unstated assumptions are where learners get lost later.
- Checks the answer. The ETS guide to GRE quantitative problem solving lists three basic steps: understand the problem, carry out a strategy, and check your answer. It also notes that you can substitute a proposed answer back into the original equation to see whether it satisfies the conditions (ETS).
OpenStax’s intermediate algebra text builds the same habit into its problem-solving strategy: read the problem, translate it into an equation, solve, then check that the answer makes sense in the problem before writing it as a complete sentence (OpenStax).
A complete example: solving 3(x − 2) = 12
Here is the equation written the way a good explanation would present it. The reasoning is the point, so read the “why” lines as seriously as the algebra.
Goal: find the value of x that makes 3(x − 2) equal 12. That means getting x alone on one side of the equals sign.
Assumption: x is a real number, and we only use moves that keep both sides equal.
Step 1: Distribute the 3.
3(x − 2) = 12 becomes 3x − 6 = 12.
Why this is valid: the distributive property says a(b + c) = ab + ac. Subtraction is adding a negative, so 3 times x and 3 times −2 gives 3x − 6. The expression is rewritten, not changed in value.
Step 2: Add 6 to both sides.
3x − 6 + 6 = 12 + 6, so 3x = 18.
Why this is valid: adding the same number to both sides of an equation keeps it balanced. We chose 6 because +6 cancels the −6 and removes everything that isn’t attached to x by multiplication.
Step 3: Divide both sides by 3.
3x ÷ 3 = 18 ÷ 3, so x = 6.
Why this is valid: dividing both sides by the same nonzero number keeps them equal. We chose 3 because x is being multiplied by 3, and division undoes multiplication.
Step 4: Check by substituting.
Put x = 6 into the original equation: 3(6 − 2) = 3(4) = 12. The left side equals the right side, so x = 6 works. This is the substitution check the ETS guide describes.
A second route, and why it also works
You could skip distributing. Since 3 multiplies the whole bracket, divide both sides by 3 first: x − 2 = 4. Then add 2 to both sides: x = 6. Same answer, fewer lines.
A good explanation can show both routes, because seeing two valid paths to one answer tells you the moves are tools, not rituals. Our post on algebra word problems applies the same translate, solve and check pattern when the equation first has to be built from a story.
Why this format helps, and what the research says
The MIT Teaching + Learning Lab notes that worked examples tend to be more effective than unguided problem solving for novices’ initial skill acquisition, partly because beginners face heavy cognitive load when learning concepts and procedures at once (MIT TLL). A summary from MIT Open Learning adds a condition: studying step-by-step solutions beats attempting problems for non-experts, especially when learners explain the solutions to themselves and see several varied examples of the same concept (MIT Open Learning).
The condition matters. Passive reading is not what the research points to. The benefit is tied to self-explanation, which means pausing at each step and saying why it is legal.
One yearlong study reported in an ISLS repository paper on a fifth-grade worked-examples curriculum found that students who self-explained worked examples scored higher on an end-of-year transfer measure than a control group that solved problems (reported average accuracy 27.2% versus 19.7%). That study involved younger students and a specific curriculum, so treat it as support for the self-explanation habit, not as a prediction for your course.
The What Works Clearinghouse guide also recommends starting with guided, scaffolded practice and moving toward independent problem solving as students need less support. That is the shape of the routine below: watch, predict, try alone.

Understanding versus copying a solution
Both start the same way: you look at a finished solution. They end differently.
Copying looks like writing each line down, nodding, and moving on. Tomorrow, the same problem with different numbers feels brand new.
Understanding looks like being able to do three things without the page:
- say what each step did and why it was allowed;
- predict the next step before seeing it;
- solve a nearby problem with new numbers.
A habit that helps: cover the solution with a sheet of paper and reveal one line at a time. Before you reveal each line, write your guess. Wrong guesses are useful. They show exactly which move you didn’t see coming, and that is the move to ask about. Our guide to learning from mistakes covers how to turn those misses into a short list worth reviewing.
The same habits in physics
The format transfers. Here is a short physics example with the same four parts.
Problem: a ball is dropped from rest from a height of 5.0 m. How fast is it moving just before it hits the ground? Ignore air resistance.
Goal: find the speed v at ground level.
Assumption: no air resistance, so mechanical energy is conserved. Use g = 9.8 m/s².
Step 1: Name the principle. By conservation of energy, the loss in potential energy equals the gain in kinetic energy: ΔKE = ΔPE. This is the same move Oxford’s physics guidance models: say which principle you are using before you write the equation.
Step 2: Write the equation. Starting from rest, KE at the bottom is ½mv², and the PE lost is mgh. So ½mv² = mgh.
Step 3: Cancel the mass. m appears on both sides, so divide both sides by m. This is why a heavier ball falls at the same speed here: the mass drops out. Then v² = 2gh.
Step 4: Substitute and solve. v² = 2 × 9.8 × 5.0 = 98, so v = √98 ≈ 9.9 m/s.
Step 5: Check. Units: √(m/s² · m) gives m/s, which is a speed. Size: about 10 m/s is roughly 22 mph, plausible for a 5 m drop (about the height of a two-story building’s roof). Oxford’s guidance also suggests connecting lines of working with words such as “implies that” and “therefore,” which is how Step 3 reads above.
Notice what stayed the same from the algebra: a stated goal, a named assumption, one justified move per line, and a check at the end. Chemistry works identically. Our six-step method for chemistry problems shows it with units and moles.
What to ask when a step doesn’t make sense
Vague confusion (“I don’t get it”) is hard for anyone to answer. A specific question is easy. These prompts work with a classmate, a TA in office hours, or a tutor:
- “Which rule lets me do this step? Show me the rule with a simple number example.”
- “Why did you pick that number to add, subtract or divide by?”
- “What would happen if I did the same thing in a different order?”
- “What assumption is hiding in this line?”
- “Can you show a second way to get the same answer?”
- “Where would a common mistake show up in this problem?”
- “Give me a similar problem with different numbers, and let me try the first step.”
These all push the explanation from “what” to “why,” which is where the learning is. They also match the self-explanation idea in the research above: you are asking for the reason, not just the next line.
A self-check without looking at the solution
Try this one with the answer covered. Solve 5(x + 2) = 35.
- Write the goal in one sentence.
- Choose your first move and write the reason beside it.
- Carry on one move at a time, with a reason each time.
- Substitute your value into the original equation.
When you finish, compare. If your first move was to distribute (5x + 10 = 35) or to divide by 5 (x + 2 = 7), both are valid. The answer is x = 5, because 5(5 + 2) = 5 × 7 = 35.
Now score yourself on the reasons, not the answer. Could you justify every line? If you got x = 5 but couldn’t say why you subtracted 10 or 2, you have a procedure and not yet an explanation. Run it again with 4(x − 3) = 20 and see if the reasons come faster.
How BoredProf’s whiteboard fits in
A written solution can’t answer back. A tutor at a whiteboard can: slow down, redraw, take a question mid-sentence. That is the idea behind BoredProf. You upload your own lecture slides, PDFs, Word or PowerPoint files, or a photo of a homework problem. BoredProf explains the idea out loud and draws the steps and figures on a whiteboard. You can use voice chat or captions, ask follow-up questions, and come back to saved lessons.
Two features line up with the habits above. You can ask questions about a step you don’t follow, which is where the prompts in the previous section come in. And you can get feedback on your own handwritten working, which supports the “try it alone, then compare” routine. Because lessons come from your course files, the notation and examples match what your professor uses. Our goal is understanding and checking explanations, not promising grades or perfect accuracy, so keep checking answers by substitution as shown above.
If you want to see how worked solutions look on the board before you upload anything, the worked examples library has solved problems you can browse.
Try it on your own materials
The free plan lets you try one lecture from one course, with stated usage caps. Pro is 29.99 CAD per month and Max is 59.99 CAD per month, for more access. Check the live pricing page and terms for current limits, eligibility and the age requirement (13 or older) before you sign up.
The public demo uses prewritten sample answers drawn on the real board, so it shows the format without needing an upload.
A routine you can reuse
Here is the short version to run on any worked solution:
- Read the goal. Say it in your own words.
- Cover and predict. Reveal one line at a time and guess the next move.
- Explain each move. Name the rule or principle that allows it.
- Flag the unclear step. Write the specific question from the prompts list.
- Solve a variant alone. Same structure, new numbers.
- Check by substitution or by sense. Units, size, original equation.
Six steps feels like a lot for one equation. For 3(x − 2) = 12 it takes about two minutes. The payoff is that the next problem of that type takes less time, because you know why the moves work, not just what they are.
FAQ
Is a step-by-step explanation the same as an answer key?
No. An answer key gives the result, sometimes with lines of working but no reasons. A step-by-step explanation includes why each move is valid and how to check the result. Use the key to confirm your answer and the explanation to understand it.
How do I use step-by-step homework help without just copying?
Try the problem first, even badly. Then view one step at a time, predict the next one, and explain each to yourself. Finish by solving a similar problem without the solution. If you can do that, you have learned the method.
What should I do if I understand every step but can’t start on my own?
That is common, and it is why guided practice gives way to independent practice gradually. Ask for the first step only, then try the rest alone. Over several problems, ask for less and less help.
Do step-by-step explanations work for science as well as math?
Yes. The structure is the same: goal, assumptions, one justified move per line, then a check. Physics adds naming the principle, such as conservation of energy, and chemistry adds tracking units through each line.
Sources
- The Instructional Process in Interventions, What Works Clearinghouse (IES, 2009)
- Worked Examples, MIT Teaching + Learning Lab
- Worked and faded examples, MIT Open Learning
- How to be a Physicist, University of Oxford Physics
- Mathematical communication, Oregon State physics
- Official GRE Quantitative Reasoning Problem-Solving Strategies, ETS
- Use a Problem Solving Strategy, OpenStax Intermediate Algebra
- Don’t Just Do It, Explain It: A 5th Grade Worked Examples Curriculum, ISLS
Ready to see the format on a real board? Try the public demo, or start the limited free plan.