# How to Understand Math Concepts, Not Just Memorize Formulas

Turn a memorized formula into real understanding. A step-by-step method, one running slope example, a misconception check and a practice question with answers.

Published by BoredProf. 2026-11-09.

You can write slope = (y₂ − y₁) / (x₂ − x₁) from memory, and you still freeze when a problem words it differently. What’s missing? Usually it isn’t more practice with the same formula. It’s knowing what the formula says about the world: what the numbers measure, why the steps happen in that order, and what answer you should expect before you calculate. This guide shows that method on one example, the slope of a line, so you can reuse it on any topic in your course.

BoredProf

app.boredprof.com

Understand the ideas behind formulas

Work through your own math materials with a whiteboard tutor that explains ideas out loud and draws steps and figures.

[Start studying with BoredProf](https://app.boredprof.com/?start=1)

## TL;DR

- Understanding a concept means you can explain why it works and where it applies, not just run the steps. The [National Research Council](https://www.nationalacademies.org/read/9822/chapter/6) describes it as an integrated, functional grasp of mathematical ideas.

- Connect every formula to four views: a table, a graph, units and a real situation.

- Predict the answer before you calculate, then explain each step out loud, including why it follows.

- Test yourself on a slightly changed problem with no notes. If you can’t adapt, you’ve found the gap.

- Ask follow-up questions until the confusion has a name. “I don’t get it” is not yet a question.

## What “understanding” a math concept actually means

Here is a quick test. Can you do these three things without looking at your notes?

- Explain why the method works, in your own words.

- Say when you would use it and when you wouldn’t.

- Solve a problem that looks a bit different from the ones you practiced.

If yes to all three, you understand it. If you can only do the first problem type from class, you have a procedure, which is useful but fragile. The National Academies’ [How Students Learn](https://www.nationalacademies.org/read/10126/chapter/6) notes that when learning isn’t grounded in understanding the problem, solving can depend on recalling memorized rules that may be forgotten if not recently reviewed.

Procedures still matter. The [National Council of Teachers of Mathematics](https://www.nctm.org/standards-and-positions/Position-Statements/Procedural-Fluency-in-Mathematics/) defines procedural fluency as applying procedures efficiently, flexibly and accurately, and transferring them to different problems. It also says learning is supported when procedures and concepts are explicitly connected in ways that make sense to students, and that memorizing an algorithm does not deepen conceptual understanding. So the goal isn’t to drop the formula. It’s to attach meaning to it.

## Our running example: the slope of a line

Slope is a good test case because most people can recite the formula and few can say what it means. We’ll use one situation all the way through.

The situation: a tank is filling with water. At the start there are 10 liters. After 2 minutes it holds 16 liters. After 4 minutes it holds 22 liters.

We’ll look at it four ways, then do the calculation.

### View 1: the table

Time (minutes) | 
Water in tank (liters) | 

0 | 
10 | 

2 | 
16 | 

4 | 
22 | 

Before any formula, look at what changes. Every 2 minutes, the water goes up by 6 liters. Per single minute, that’s 3 liters. You just found the slope without naming it.

### View 2: the graph

Plot time on the horizontal axis and liters on the vertical axis. The three points sit on a straight line. Moving from one point to the next, you go right 2 and up 6. “Rise over run” is nothing more than that: how far you go up for a given distance across.

The line is straight because the same amount is added in every equal time step. That’s the real meaning of a constant rate of change. A curve would mean the tank fills faster or slower as time passes.

### View 3: the units

The slope is (22 − 10) / (4 − 0) = 12 / 4 = 3. But a bare 3 is half an answer. The top of the fraction is liters and the bottom is minutes, so the slope is 3 liters per minute.

Units are the cheapest understanding check there is. If you ever write a slope with no units, ask what the top and bottom of the fraction measure. If you can’t say, you’ve found something to study.

### View 4: the real rate

Now the sentence that carries the concept: “The tank gains 3 liters every minute, and it started with 10.” That gives the equation y = 3x + 10, where 3 is the rate and 10 is the starting amount. Each symbol now has a job you can name.

The same structure appears everywhere. Distance over time is speed. Cost over items is price per item. Change in temperature over time is a warming rate. The formula is the same; the units tell you which story you’re in.

## Step 1: predict before you calculate

This is the habit that separates understanding from pattern matching. Before computing, say roughly what the answer should be.

Question: how much water is in the tank at 10 minutes?

Prediction: it gains 3 liters a minute, so in 10 minutes that’s about 30 more liters on top of the 10 we started with. I expect around 40.

Calculate: y = 3(10) + 10 = 40 liters.

Why this step helps: a prediction forces you to use the meaning (3 liters per minute, starting at 10) instead of reaching for symbols. If your calculation disagrees with your prediction, one of them is wrong, and finding which is where the learning happens. A typo shows up instantly instead of surviving to the final answer.

A good prediction can be rough. “More than 30, less than 50” is enough to catch most errors.

## Step 2: explain each step out loud, with the reason

Talking forces gaps into the open. You can nod along to a written solution without noticing that you couldn’t have produced one line of it. Saying it aloud doesn’t allow that.

Researchers who study explanation make the same point. [Horiguchi and colleagues (2015)](https://pmc.ncbi.nlm.nih.gov/articles/PMC6302847/) recommend explaining not only how a problem is solved but why the principles or laws apply to the situation.

Try it on our tank, using this pattern: I do X because Y.

- “I subtract the water amounts, 22 − 10, because I want the change in water.”

- “I subtract the times, 4 − 0, because I want how long that change took.”

- “I divide change in water by change in time because slope is the change per one unit of time.”

- “I attach liters per minute because the top is liters and the bottom is minutes.”

- “I add the 10 because the tank wasn’t empty at the start.”

If you get stuck on a because, that’s the exact spot to ask about. It’s far more useful than rereading the whole chapter.

A small trick: explain it to an imaginary friend who’s missing the lecture, or to a rubber duck. Keep going until the duck would stop asking “but why?”

## Step 3: connect it to what you already know

Understanding grows by attaching new ideas to old ones. The National Research Council’s [Adding It Up](https://www.nationalacademies.org/read/9822/chapter/6) says connected understanding helps students link new ideas to what they know, supports retention, and lets them reconstruct a method they’ve forgotten. A [report in ERIC](https://files.eric.ed.gov/fulltext/EJ1231249.pdf) adds that people who understand a topic well tend to organize their knowledge around key concepts.

For slope, here are a few connections worth making:

- Arithmetic: slope is division in disguise, a rate like miles per gallon.

- Tables: equal steps in x giving equal steps in y is what makes a table linear.

- Word problems: “per” in a sentence usually points to a rate. That connection is the backbone of [algebra word problems](/blog/algebra-word-problems).

- Later topics: in calculus, the derivative is the slope of a curve at a single point, so a solid grip on slope pays off for years. Our guide on [how to understand calculus](/blog/understand-calculus) builds on exactly this.

A concept map helps here. [NARST](https://narst.org/research-matters/teaching-conceptual-understanding) recommends helping students see the big picture of how concepts connect to each other and to everyday experiences, including through concept mapping. Draw slope in the center and branch out to rate, steepness, table, graph, units and equation. Then draw a line between any two branches and write one sentence saying how they relate.

## Step 4: test a slightly changed problem, no notes

This is the honest check. If you only understand the example you saw, a small tweak will break it. NARST recommends testing with unfamiliar problems because that is how students come to acquire the understanding needed to solve them, and the National Research Council says conceptual understanding supports solving new and unfamiliar problems.

Changed problem: a different tank starts at 50 liters. After 5 minutes it holds 35 liters. How fast is it changing, and when is it empty?

Predict first: it’s losing water, so the rate should be negative. It lost 15 liters in 5 minutes, so about 3 per minute. Emptying 50 liters at 3 a minute should take a bit under 17 minutes.

Calculate: slope = (35 − 50) / (5 − 0) = −15 / 5 = −3 liters per minute. Set 50 − 3x = 0, so x = 50/3, or about 16.7 minutes.

Why it follows: the formula didn’t change, only the sign. A negative slope means the quantity falls as time rises. You didn’t need a new rule, just the same idea in a new setting.

If you got stuck, ask what stayed the same and what changed between this problem and the first one. That question alone is a decent way to study.

A second check borrowed from teaching research: the Carnegie Mellon Eberly Center suggests a [sorting task](https://www.cmu.edu/teaching/solveproblem/strat-cantapply/cantapply-02.html), where you group problems by the underlying principle instead of by surface features, since grouping by surface similarity can indicate you’re missing the deep structure. Take ten problems from your homework and sort them by method, not by topic heading or story. A tank and a taxi fare may belong in the same pile.

## Misconception check: three slope mistakes to catch

Try to spot what’s wrong in each claim before reading the fix.

- “The slope is 12, because the water went from 10 to 22.” That’s the change in liters over the whole trip, but you haven’t divided by the time. Slope compares two changes. The 12 is only the top of the fraction.

- “The steeper the picture, the bigger the slope.” Not necessarily. Stretch the vertical axis and the same line looks steeper. Read the actual axis numbers and units, not the angle of the drawing.

- “Slope = (y₂ − y₁) / (x₁ − x₂)” (mixed order). The subtraction has to go in the same order on top and bottom. Flip one and you get the wrong sign. Your prediction catches this: if water is rising and your slope is negative, something is off.

Mistakes like these are useful data. For a method to turn them into study material, see our guide on [learning from mistakes](/blog/learn-from-mistakes).

## Short practice question

Try it yourself before reading the answer. Use the whole routine: predict, calculate, explain aloud.

Question: a gym charges a one-time sign-up fee plus a fixed monthly fee. After 2 months you’ve paid a total of $85. After 5 months you’ve paid $160.

a) What is the slope, with units, and what does it mean?
b) What was the sign-up fee?
c) Predict, then calculate, the total after 8 months.

Answer, with the reasons:

a) Slope = (160 − 85) / (5 − 2) = 75 / 3 = $25 per month. The top is dollars and the bottom is months. It means each extra month adds $25, which is the monthly fee.

b) After 2 months, the monthly fees alone come to 2 × 25 = $50. You paid $85, so the other $35 is the sign-up fee. That’s the starting amount, the same role the 10 liters played in the tank.

c) Prediction: from month 5 to month 8 is 3 more months, so about 3 × 25 = $75 more than $160, roughly $235. Calculation: total = 25(8) + 35 = $235. The prediction and the calculation match, which is a good sign.

Quick check of understanding: if the total after 5 months had been $130 instead, would the slope go up or down? Why? (It would go down: the same 3-month change in time now produces a smaller change in cost, so each month costs less.)

## When your own course materials are the problem

Here’s a practical snag. The example above is clean, but your course doesn’t use it. Your professor has particular notation, particular examples and a particular order of topics. A general explanation online might use different symbols from the ones on your slides, which adds one more thing to translate.

That’s the gap we built BoredProf for. You upload your own lecture slides, PDFs, Word or PowerPoint files, or a photo of a homework problem. BoredProf explains the idea out loud and draws the steps and figures on a whiteboard. You can use voice chat or captions, ask follow-up questions, and revisit saved lessons. It can also give feedback on your handwritten working.

In terms of this guide: use it for step 2. Ask it to explain a slide, then ask “why does that step follow?” until the reasoning is clear. Then close it and try the changed problem on your own. It’s meant to help you understand and check explanations, not to replace your course, your textbook or a human tutor. Check explanations against your class materials as you would with any source. The [worked examples library](https://boredprof.com/examples) shows what the step-by-step format looks like.

If diagrams are what click for you, our guide to [visual study strategies](/blog/visual-learning-strategies) covers how to use them without boxing yourself into a “type.” Everyone benefits from seeing the same idea in several forms. The Relay Graduate School of Education notes that [using multiple representations](https://relay.libguides.com/responding-to-student-understanding/multiple-methods) promotes conceptual understanding through comparison and contrast, which is why the tank appeared as a table, graph, units and equation above.

## Does this work beyond math class?

The four-view habit (words, table or data, picture, units) travels well. In a physics course, a velocity-time graph’s slope is acceleration, and the units (meters per second per second) say so. In chemistry, a concentration-versus-time graph’s slope is a reaction rate. In biology, a growth curve has the same structure. The details differ by course, so check how your own materials define each term, but the question stays the same: what do the top and bottom of this ratio measure?

For subject-specific routines, see our guides on [solving chemistry problems](/blog/solve-chemistry-problems) and [understanding biology](/blog/understand-biology).

BoredProf currently shows math, physics, chemistry and biology on its public site. The free plan covers one lecture from one course with usage caps, and Pro and Max expand access. Pro is published at 29.99 CAD per month and Max at 59.99 CAD per month. Limits, eligibility and current prices are on the [pricing page](https://boredprof.com), and the terms require age 13 or older.

## A weekly routine you can actually keep

Understanding sticks when you rehearse the habit, not when you cram it. Here is one compact routine for any new formula:

- Four views: write the formula, then add a table, a sketch, the units and one real situation.

- Predict: guess the answer to a practice problem before calculating.

- Explain: say each step with its because. Mark every spot where you hesitate.

- Ask: turn each hesitation into a specific question for a classmate, office hours or a tutor tool.

- Change it: do one altered problem with no notes, a day or two later.

Before an exam, the same routine slots into a longer plan: see [how to prepare for a math exam](/blog/prepare-for-math-exam). One caution from NCTM: [timed tests](https://www.nctm.org/standards-and-positions/Position-Statements/Procedural-Fluency-in-Mathematics/) do not assess fluency and can negatively affect students, so don’t judge your understanding by speed alone. Judge it by whether you can explain and adapt.

## Try it on your own slides

Pick the one formula in your course you currently only memorize. Run it through the four views, predict an answer, and explain it out loud. If you want to hear it explained and drawn on a whiteboard from your own material, [try the public demo](https://boredprof.com/#demo) (it uses prewritten sample answers drawn on the real board), or [start the limited free plan](https://app.boredprof.com/?start=1), no card needed.

## FAQ

### Why can I follow the teacher but not solve problems myself?

Following a worked example only requires recognizing each step. Solving requires producing them, which needs knowing why each step comes next. Try predicting each next step before the teacher does it, then explain it aloud after.

### How do I understand a concept when the textbook definition makes no sense?

Start with a concrete case, such as a table of numbers or a real rate, then return to the definition and match each phrase to something in the case. If one phrase still has no match, that phrase is your specific question to ask.

### Is memorizing formulas bad?

No. Fluent procedures free up attention for harder thinking. The problem is memorizing without meaning, because those rules are easy to misremember and hard to adapt. Keep the formula, and add the why and the units.

### How long does it take to understand a new math concept?

It varies by topic and by what you already know, so no honest number applies to everyone. A better measure is whether you can pass the changed-problem test a day or two later without notes.

## Sources

- [National Research Council, Adding It Up, Chapter 4](https://www.nationalacademies.org/read/9822/chapter/6)

- [National Academies, How Students Learn, Chapter 5](https://www.nationalacademies.org/read/10126/chapter/6)

- [NCTM, Procedural Fluency in Mathematics](https://www.nctm.org/standards-and-positions/Position-Statements/Procedural-Fluency-in-Mathematics/)

- [Horiguchi et al., A framework of generating explanation for conceptual understanding](https://pmc.ncbi.nlm.nih.gov/articles/PMC6302847/)

- [ERIC, Connecting new knowledge to old](https://files.eric.ed.gov/fulltext/EJ1231249.pdf)

- [NARST, Teaching Conceptual Understanding to Promote Students’ Ability to do Transfer Problems](https://narst.org/research-matters/teaching-conceptual-understanding)

- [Carnegie Mellon Eberly Center, superficial features vs. underlying principles](https://www.cmu.edu/teaching/solveproblem/strat-cantapply/cantapply-02.html)

- [Relay Graduate School of Education, Multiple Methods & Representations](https://relay.libguides.com/responding-to-student-understanding/multiple-methods)
